What is the solution to the network camera picture delay?

The era of high-definition security is here, have you used the high-definition network camera? No, then you have OUT, used it, congratulations, and catch up with the trend of the times. How does it feel to use it? Ultra-clear-everything is clear and easy-the wiring is simple, there is a little delay... OK, I believe that many people will habitually put their hands in front of the camera before touching the million high-definition network cameras. After shaking, check the smoothness of the picture and see if there is a delay. What about the delay of the network camera picture?

1. For network cable problems, you must use Category 6 copper network cables. Do not use copper-clad aluminum network cables. The distance between the network cables should not exceed 100 meters, and the 100M router or switch should not connect more than 8 cameras.

2. The normal operation of the network camera cannot be separated from the power supply. At present, most of the network cameras support DC12V DC power supply and AC24V AC power supply. Because the network camera has multiple built-in processing chips, the power can reach about 15W under normal working conditions. In addition, the network camera Most of them support POE power supply. Some projects use POE power supply for the convenience of construction during implementation. Because POE power supply has certain requirements on the length and quality of the cable, and the camera stops working when the network cable is loose, the built-in The memory card will not continue to record, so it is recommended to use AC24V AC power supply to power the camera to ensure the stable operation of the camera. Only when the high-definition video network camera works stably, other malfunctions will not occur.

3. The network camera module is stuck when it comes out. It is the comprehensive performance of the camera's image processing capability and network compression capability. This is a problem that users cannot solve.

4. The camera manufacturer's own technology has defects. The network camera produced will have a relatively large delay after running for a long time, which greatly exceeds the delay time required by the national standard. It can be restored to normal after the power is turned on. In this case, it is recommended that users choose a monitoring product of a big brand, which has excellent technology and after-sales guarantee.