Wiring skills of network cameras

Many novices, who are new to the security industry, do not understand the installation and wiring of network cameras, especially those who have not been in touch with computer network systems before. It is still difficult for network cameras to install and wiring. If you have worked in computer network systems before, It's relatively easy. Next, the editor will share some wiring tips for network cameras.

Wiring skills of network cameras are as follows:

1. The wiring of the network camera uses network cables and power cables, or optical cables and switch equipment. First, use the calculation method to estimate the length of the line, because once the network cable is cut and the line is not enough, it will cause signal attenuation and affect the signal. quality.

2. To install a network camera, make full use of the existing network cable structure inside and outside the building. First, check the monitoring site environment, select the best installation point, and then lay a network cable from the installation point to the nearest network access point.

3. If there is strong electricity in the environment, pay attention to the camera installation should be insulated and isolated from the ground to avoid interference.

4. If the surveillance network camera is not integrated with infrared, try not to open the lens when moving or installing the surveillance camera.

The wiring skills of the network camera are shared here first. The network camera is installed within a radius of 100 meters. We can install a switch in the middle, and multiple network cameras are transmitted to the monitoring center through the network switch.